Fluke                                                       MET/CAL Procedure
=============================================================================
INSTRUMENT:            Sub Soltec TJ1 (1 year) CAL VER /5520
DATE:                  11-Sep-97
AUTHOR:                Fluke Corporation
REVISION:              $Revision: 1.1 $
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       20
NUMBER OF LINES:       125
CONFIGURATION:         Fluke 5520A
=============================================================================
#
# Source:
#   Soltec TA100-438/TA200-938 Instruction Manual, TJ1 Specifications
#
# Compatibility:
#   5500/CAL 5.0 or MET/CAL 5.0 or later.
#
# Subprocedures:
#   None
#
# Required Files:
#   None
#
# System Specifications:
#   TUR calculation is based on specification interval of the accuracy file.
#   The default 5520A accuracy file contains 90 day specs.
#
# Fluke makes no warranty, expressed or implied, as to the fitness
# or suitability of this procedure in the customer's application.
#
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  DISP         {Procedure not formally tested with UUT.}
  1.001  DISP         {See procedure README file.}
  1.002  ASK-         N K            P                            F        V
  1.003  ASK+   R                                      X
  1.004  HEAD         INITIAL SETUP
  1.005  DISP         On the Mainframe, set the following...
  1.005  DISP
  1.005  DISP         TRIGGER: MANU. TRIG.
  1.005  DISP         Y SIZE: 200mm
  1.005  DISP         T SIZE: X1
  1.005  DISP         TIME/DIV: 2 sec.
  1.006  DISP         EXTERNAL CONTROL settings on the Mainframe...
  1.006  DISP         MODE: REAL
  1.006  DISP         TRIGGER: SHOT
  1.007  DISP         On the TJ1, set the following...
  1.007  DISP
  1.007  DISP         LINE WIDTH: MEDIUM
  1.007  DISP         TRIGGER: OFF
  1.007  DISP         LOWER TEMP (C): -100
  1.007  DISP         RANGE (C): +100
  1.008  HEAD         {ZERO}
  1.009  DISP         Connect the 5520A TC terminals to the TJ1 INPUT
  1.009  DISP         using Type J thermocouple wire and connectors.
  1.010  DISP         Press START on the Mainframe to feed the chart paper.
  1.011  HEAD         ZERO: {-100degC}
  1.012  5520         -100degC                                    _J TC S  2W
  1.013  EVAL   Does TJ1 {indicate 0% deflection (-100degC)}?
  2.001  HEAD         ZERO: {-50degC}
  2.002  DISP         LOWER TEMP (C): -50
  2.003  5520         -50degC                                     _J TC S  2W
  2.004  EVAL   Does TJ1 {indicate 0% deflection (-50degC)}?
  3.001  HEAD         ZERO: {0degC}
  3.002  DISP         LOWER TEMP (C): 0
  3.003  5520         0degC                                       _J TC S  2W
  3.004  EVAL   Does TJ1 {indicate 0% deflection (0degC)}?
  4.001  HEAD         ZERO: {50degC}
  4.002  DISP         LOWER TEMP (C): 50
  4.003  5520         50degC                                      _J TC S  2W
  4.004  EVAL   Does TJ1 {indicate 0% deflection (50degC)}?
  5.001  HEAD         ZERO: {100degC}
  5.002  DISP         LOWER TEMP (C): 100
  5.003  5520         100degC                                     _J TC S  2W
  5.004  EVAL   Does TJ1 {indicate 0% deflection (100degC)}?
  6.001  HEAD         ZERO: {200degC}
  6.002  DISP         LOWER TEMP (C): 200
  6.003  5520         200degC                                     _J TC S  2W
  6.004  EVAL   Does TJ1 {indicate 0% deflection (200degC)}?
  7.001  HEAD         ZERO: {300degC}
  7.002  DISP         LOWER TEMP (C): 300
  7.003  5520         300degC                                     _J TC S  2W
  7.004  EVAL   Does TJ1 {indicate 0% deflection (300degC)}?
  8.001  HEAD         ZERO: {400degC}
  8.002  DISP         LOWER TEMP (C): 400
  8.003  5520         400degC                                     _J TC S  2W
  8.004  EVAL   Does TJ1 {indicate 0% deflection (400degC)}?
  9.001  HEAD         ZERO: {500degC}
  9.002  DISP         LOWER TEMP (C): 500
  9.003  5520         500degC                                     _J TC S  2W
  9.004  EVAL   Does TJ1 {indicate 0% deflection (500degC)}?
 10.001  HEAD         ZERO: {600degC}
 10.002  DISP         LOWER TEMP (C): 600
 10.003  5520         600degC                                     _J TC S  2W
 10.004  EVAL   Does TJ1 {indicate 0% deflection (600degC)}?
 11.001  HEAD         {FULL SCALE}
 11.002  DISP         On the TJ1, set the following...
 11.002  DISP
 11.002  DISP         LOWER TEMP (C): 0
 11.002  DISP         RANGE (C): +100
 11.003  HEAD         FULL SCALE: {100degC}
 11.004  MESS         Slew for Full Scale (200mm) Deflection.
 11.005  ASK-   R
 11.006  5520   100   100degC        0.3%                         _J TC    2W
 12.001  ASK+   R
 12.002  HEAD         FULL SCALE: {200degC}
 12.003  5520   200   200degC        0.3%                         _J TC    2W
 13.001  HEAD         FULL SCALE: {500degC}
 13.002  5520   500   500degC        0.3%                         _J TC    2W
 14.001  HEAD         FULL SCALE: {1000degC}
 14.002  5520   1000  1000degC       0.3%                         _J TC    2W
 15.001  HEAD         FULL SCALE: {1200degC}
 15.002  5520   1200  1200degC       0.3%                         _J TC    2W
 16.001  MESS
 16.002  HEAD         {LINE WIDTH}
 16.003  DISP         Set the LINE WIDTH control to OFF.
 16.004  EVAL   [N]Is {there a line recording}?
 17.001  DISP         Set the LINE WIDTH control to LIGHT.
 17.002  EVAL   Is the {line recording Light}?
 18.001  DISP         Set the LINE WIDTH control to MEDIUM.
 18.002  EVAL   Is the {line recording Medium}?
 19.001  DISP         Set the LINE WIDTH control to BOLD.
 19.002  EVAL   Is the {line recording Bold}?
 20.001  DISP         Press STOP on the Mainframe to stop the chart paper.
 20.002  END